• Fleet of vehicles

MAN 26.430 HGV

 

MAN 26.430 HGV

Close

 

MAN 26.430 HGV

MAN 26.430 HGV

SPECIFICATIONS

  • Curtain side HGV mainly used to transport devices and equipment
  • To drive on to it using a forklift, electric cranes, etc., the rear end is sloped and two moveable ramps are installed securely

TECHNICAL DATA

Type MAN 26.430
Length 9,700 mm
Width 2,550 mm
Height 4,000 mm
Construction
  • Usable dimensions 6,900 mm x 2,400 mm x 2,850 mm
  • Comprises rear shutter, side slider and Edscha
  • chassis behind the rear axle, sloped to 1,750 x 180 mm
Ramps
  • Two ramps, each L 2,950 mm x W 950 mm, moveable
  • Elector-hydraulic drive
Gross weight 25,700 kg
Empty weight 10,950 kg
Payload 14,750 kg
Combination variants
  • Operation with Kotschenreuther trailer
  • Transport can be carried out with a total train weight of up to 40 t
  • Loading weight differences that go beyond this must be approved

MAN 26.430 HGV

Examples based on our practical experience

  • schneider_fuhrpark_lkw-MAN_01.jpg
  • schneider_fuhrpark_lkw-MAN_02.jpg
  • schneider_fuhrpark_lkw-MAN_03.jpg
  • schneider_fuhrpark_lkw-MAN_04.jpg
  • schneider_fuhrpark_lkw-MAN_05.jpg
  • schneider_fuhrpark_lkw-MAN_06.jpg
  • schneider_fuhrpark_lkw-MAN_07.jpg
  • schneider_fuhrpark_lkw-MAN_08.jpg
  • schneider_fuhrpark_lkw-MAN_09.jpg
  • schneider_fuhrpark_lkw-MAN_10.jpg
  • schneider_fuhrpark_lkw-MAN_11.jpg
  • schneider_fuhrpark_lkw-MAN_12.jpg
  • schneider_fuhrpark_lkw-MAN_13.jpg
Extended data sheet

Close

 
MAN 8.140 Platform

 

MAN 8.140 Platform

schließen

 

MAN 8.140 Platform

MAN 8.140 Platform

SPECIFICATIONS

  • 7.5 t truck with flatbed superstructure, is primarily used to transport devices, equipment and tool containers
  • In particular, it is used to carry out assembly services specifically for machine relocation, heavy and special assembly, industrial assembly, etc.

TECHNISCHE DATEN

Type MAN LE 8.140
Length 6,950 mm
Width 23550 mm
Height 2,600 mm varies by cargo
Construction
  • Usable dimensions 4,000 mm x 2,400 mm x 0,000 mm
Tail lift
  • BÄR, one-piece L 1,600 mm x W 2,250 mm
  • 1.000 kg Lifting capacity
Payload 2,400 kg

MAN 8.140 Platform

Examples based on our practical experience

Galerie - Fuhrpark - MAN Pritsche

  • schneider_fuhrpark_MAN-pritsche_01.jpg
  • schneider_fuhrpark_MAN-pritsche_02.jpg
  • schneider_fuhrpark_MAN-pritsche_03.jpg
  • schneider_fuhrpark_MAN-pritsche_04.jpg
  • schneider_fuhrpark_MAN-pritsche_05.jpg
  • schneider_fuhrpark_MAN-pritsche_06.jpg
  • schneider_fuhrpark_MAN-pritsche_07.jpg
  • schneider_fuhrpark_MAN-pritsche_08.jpg
  • schneider_fuhrpark_MAN-pritsche_09.jpg
Extended data sheet

Close

3-axle trailer

 

3-axle trailer

Close

 

3-axle trailer

3-axle trailer

SPECIFICATIONS

  • Curtain side trailer mainly used to transport devices and equipment
  • To transport forklifts, electric cranes, etc., a one-piece lattice ramp is affixed
  • The MAN 26.430 is used as the tractive unit

TECHNICAL DATA

Type APS 324 Kotschenreuther
Length 9,080 – 9,680 mm
Width 2,550 mm
Height 4,000 mm
Loading height 907 mm
Axle load 3 x 10,000 kg
Empty weight 9,850 kg
Technical gross weight 30,000 kg möglich
Construction
  • Usable dimensions 7,350 mm x 2,450 mm x 3,100 mm
  • 2 x side sliders, Edscha and structure widening
Ramp
  • One-piece lattice ramp, L 5,900 mm x W 2,450 mm
  • Driven electro-hydraulically
Remark Can be used without additional approval up to 40,000 kg total tractive weight

3-axle trailer

Examples based on our practical experience

  • schneider_fuhrpark_3-7.jpg
  • schneider_fuhrpark_3-achsanhaenger_01.jpg
  • schneider_fuhrpark_3-achsanhaenger_02.jpg
  • schneider_fuhrpark_3-achsanhaenger_03.jpg
  • schneider_fuhrpark_3-achsanhaenger_04.jpg
  • schneider_fuhrpark_3-achsanhaenger_05.jpg
  • schneider_fuhrpark_3-achsanhaenger_06.jpg
  • schneider_fuhrpark_3-achsanhaenger_07.jpg
Extended data sheet

Close

 
Mobile workshop

 

Mobile workshop

Close

 

Mobile workshop

Mobile workshop

SPECIFICATIONS

  • 7.5 t box body HGV mainly used to transport devices and equipment
  • In particular, it is used to carry out assembly tasks when relocating machines, when carrying out heavy and special assembly, industrial assembly, etc.

TECHNICAL DATA

Type MAN 8.250
Length 7,140 mm
Width 2,550 mm
Height 3,180 mm
Construction
  • Usable dimensions 4,000 mm x 2,200 mm x 1,980 mm
  • Insulated box body with additional heating
  • Bott equipment system
  • 16 A electrical connection with 16 A and 220 V sub-distribution
Hydraulic platform Bär, one-piece, L 1,600 mm x W 2,250 mm
Payload 1,290 kg

Mobile workshop

Examples based on our practical experience

  • schneider_fuhrpark_werkstattwagen_1.jpg
  • schneider_fuhrpark_werkstattwagen_2.jpg
  • schneider_fuhrpark_werkstattwagen_3.jpg
  • schneider_fuhrpark_werkstattwagen_4.jpg
  • schneider_fuhrpark_werkstattwagen_5.jpg
  • schneider_fuhrpark_werkstattwagen_6.jpg
  • schneider_fuhrpark_werkstattwagen_7.jpg
Extended data sheet

Close

 
9 t Hyster forklift

 

9 t Hyster forklift

Close

 

9 t Hyster forklift

9 t Hyster forklift

SPECIFICATIONS

  • Front tower forklift designed particularly for use when assembling
  • With open cab (only driver protection roof) for better view and acoustics
  • Fork adjusting device including fork carriage that can be replaced with a hydraulically-adjustable crane boom using quick-change system
  • Carrying out assembly with insertion swivel hook and fork extension

TECHNICAL DATA

Type Hyster H 9.00 FT6G
Length without forks 3,944 mm
Width 2,030 mm
Height 2,702 mm
Drive Liquefied petroleum gas with double cylinder holder
Tower Triplex with complete free lift
Fork length 2,400 mm
Free lift 1,565 mm
Lift height 4,615 mm
Basic load bearing capacity 9,000 kg at 600 mm L/C
Empty weight 13,180 kg (with fork adjusting device)
Attachments  
SHB crane boom
  • P5-KRAT, 12.0 t
  • 1,300 - 2,200 mm boom (with 2 hooks)
  • Boom can be adjusted hydraulically
  • Crane hook with swivel can be rotated while loaded
  • Empty weight: 703 kg (without transport rack)
  • Bearing load: 9,000 kg at 600 mm L/C
  • Bearing load: 9,000 kg at 1,200 mm L/C
  • Bearing load: 9,000 kg at 2,200 mm L/C
  • Empty weight: 1,500 kg
  • The crane boom is secured in a rack for transport purposes
  • The transport rack is also used for a fast and safe changeover on the forklift, as well as to store gas bottles, sling gear, equipment, etc.
Fork adjusting device
  • FEM 4A (width: 2,030 mm)
  • Fork adjusting device with P1-ZVSV 10.0 side shift valve
  • Hydraulic continuous fork adjustment
  • The side shift is 400 mm when the forks are in the middle position and decreases towards zero as you move left and right to the end positions

9 t Hyster forklift

Examples based on our practical experience

  • schneider_fuhrpark_gabelstapler-hyster-9t_01.jpg
  • schneider_fuhrpark_gabelstapler-hyster-9t_02.jpg
  • schneider_fuhrpark_gabelstapler-hyster-9t_03.jpg
  • schneider_fuhrpark_gabelstapler-hyster-9t_04.jpg
  • schneider_fuhrpark_gabelstapler-hyster-9t_05.jpg
  • schneider_fuhrpark_gabelstapler-hyster-9t_06.jpg
  • schneider_fuhrpark_gabelstapler-hyster-9t_07.jpg
  • schneider_fuhrpark_gabelstapler-hyster-9t_08.jpg
  • schneider_fuhrpark_gabelstapler-hyster-9t_09.jpg
Extended data sheet

Close

 
5.5 t Hyster forklift

 

5.5 t Hyster forklift

Close

 

5.5 t Hyster forklift

5.5 t Hyster forklift

SPECIFICATIONS

  • Front tower forklift designed particularly for use when assembling
  • With open cab (only with driver protection roof) for better view and acoustics
  • Carrying out assembly with interchangeable forks and extensions, as well as various sizes of swivel hooks

TECHNICAL DATA

Type Hyster H 5,5 FT
Length 4,540 mm with 1,200 mm forks
Width 1,219 mm
Height 2,515 mm
Drive Liquefied petroleum gas with double cylinder holder
Tower Triplex with complete free lift
Free lift 1,530 mm
Lift height 5,000 mm
Basic load bearing capacity 5,500 kg at 600 mm L/C
Forks 1,200 mm oder 2,400 mm
Empty weight 7,529 kg
Attachment  
Stabau crane boom
  • 1,300 - 2,200 mm boom (with 2 hooks)
  • Bearing load: 5,500 kg at 600 mm L/C
  • Bearing load: 3,000 kg at 1,200 mm L/C
  • Bearing load: 1,650 kg at 2,200 mm L/C
  • Empty weight: 348 kg (without transport rack)
  • The crane boom is secured in a rack for transport purposes
  • The transport rack is also used for a fast and safe changeover on the forklift, as well as to store forks sized up to 1,200 mm, gas bottles, sling gear, equipment, etc.

5.5 t Hyster forklift

Examples based on our practical experience

  • schneider_fuhrpark_gabelstapler_5,5t_1.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_2.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_3.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_4.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_5.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_6.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_7.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_8.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_9.jpg
Extended data sheet

Close

 
3 T HYSTER FORKLIFT

 

3 T HYSTER FORKLIFT

schließen

 

3 T HYSTER FORKLIFT

3 T HYSTER FORKLIFT

SPECIFICATIONS

  • Front mast forklifts preferably designed for assembly use
  • Open cab only with a protective roof for better visibility and acoustics
  • Assembly version with replacement forks and extensions in various sizes as well as swivel hooks
  • An extra small design especially for narrow and low passages

TECHNICAL DATA

Type Hyster H 3.00 FT
Length 2,633 mm
Width 1,186 mm
Height 2,110 mm
Drive Liquified petroleum gas
Tower 1,970 mm
Lifting framework Triplex
Free lift 1,382 mm
Lifting height 4,750 mm
Basic load-bearing capacity 4.999 kg
Forks 1.200 mm
Empty weight 4.999 kg
Attachments Fork extension, swivel hook

3 T HYSTER FORKLIFT

Examples based on our practical experience

  • schneider_fuhrpark_gabelstapler_5,5t_1.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_2.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_3.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_4.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_5.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_6.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_7.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_8.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_9.jpg
Extended data sheet

Close

2.5 t Hyster forklift

 

2.5 t Hyster forklift

Close

 

2.5 t Hyster forklift

2.5 t Hyster forklift

SPECIFICATIONS

  • Front tower forklift designed particularly for use when assembling
  • With open cab (only with driver protection roof) for better view and acoustics
  • interchangeable forks and extensions, as well as swivel hooks

TECHNICAL DATA

Type Hyster H 2,5 FT
Length 2,400 mm without forks
Width 1,200 mm
Height 2,580 mm
Drive Liquefied petroleum gas
Tower Triplex with complete free lift
Free lift 2,150 mm
Lift height 6,000 mm
Basic load bearing capacity 2,500 kg at 600 mm L/C
Forks L 1,200 mm x W 100 mm x H 40mm
Empty weight 4,230 kg

Hyster H 2.5 FT

Examples based on our practical experience

  • schneider_fuhrpark_gabelstapler_2,5t_1.jpg
  • schneider_fuhrpark_gabelstapler_2,5t_2.jpg
  • schneider_fuhrpark_gabelstapler_2,5t_3.jpg
Extended data sheet

Close

 
Valla V-Kart 90 E electric indoor crane

 

Valla V-Kart 90 E electric indoor crane

Close

 

Valla V-Kart 90 E electric indoor crane

Valla V-Kart 90 E electric indoor crane

SPECIFICATIONS

  • Use in industrial plants on smooth, solid ground
  • Not authorised for use on public roads; transported to usage location using a suitable HGV
  • Mainly used to lift, transport and position loads; can move freely without support
  • Particularly suitable for machine transport, operational relocations, industrial assembly or can also be used for machine construction

TECHNICAL DATA

Type Valla V-Kart 90 E
Length 3,435 mm
Width 1,735 mm
Height 2,290 mm
Drive
  • Electric with 14 KW - 48 volt reversible DC motor
  • Maximum speed 10 km / h
Battery 725 Ah – 48 volt
Steering Fully hydraulic with 2 x 70 ° steering angle
Tower
  • Comprising 4 tower elements that can be adjusted hydraulically
  • Maximum angle of the tower when fully raised: 51 °
  • Distance from hook to ground in horizontal position: 1.6 m
Maximum lift height 7,500 mm with 2,500 mm boom with 2,800 kg load
Maximum range 5,300 mm at 1,500 mm hook height with 1,900 kg residual load
Basic load bearing capacity 9,000 kg
Empty weight 9,200 kg
Attachments  
Adjustable point
  • Boom extension
  • Boom point can be adjusted mechanically by 500 mm
  • Angle can be continuously moved hydraulically
  • Maximum lift height: 9,000 mm
  • Maximum range: 6,910 mm

Valla V-Kart 90 E

Examples based on our practical experience

  • schneider_fuhrpark_elektro-hallenmobilkran_01.jpg
  • schneider_fuhrpark_elektro-hallenmobilkran_02.jpg
  • schneider_fuhrpark_elektro-hallenmobilkran_03.jpg
  • schneider_fuhrpark_elektro-hallenmobilkran_04.jpg
  • schneider_fuhrpark_elektro-hallenmobilkran_05.jpg
  • schneider_fuhrpark_elektro-hallenmobilkran_06.jpg
  • schneider_fuhrpark_elektro-hallenmobilkran_07.jpg
  • schneider_fuhrpark_elektro-hallenmobilkran_08.jpg
  • schneider_fuhrpark_elektro-hallenmobilkran_09.jpg
  • schneider_fuhrpark_elektro-hallenmobilkran_10.jpg
Extended data sheet

Close

 
MC 104 electric mini caterpillar crane

 

MC 104 electric mini caterpillar crane

Close

 

MC 104 electric mini caterpillar crane

MC 104 electric mini caterpillar crane

SPECIFICATIONS

  • The mini caterpillar crane is designed for use indoors, in spaces that are difficult to access
  • Thanks to its rubber tracks and leg supports, it has a low bearing load and is particularly kind on laminated floors or natural stone floors
  • It is predominantly used if space is limited or to moved through narrow room doors
  • Its compact construction enables steel girders, machine parts or particularly bulky parts to be assembled in the building

TECHNICAL DATA

Type Maeda MC 104
Load 995 kg with 1.1 m boom
Length 2,160 mm, of which running gear: 1,044 mm
Width 600 mm
Height 1,305 mm
Empty weight 1,050 kg
Drive Electric motor, 16 A, 400 V, power: 5,5 KW
Maximum hook height 5.5 m
Maximum range 5.1 m
Rotor
  • Operational range: 360 ° continuous
  • Hydraulic support
  • Use with remote control
Winch system
  • Cable speed: 3.2 m/min
  • Cable type: IWRC 6 x Fl (29) Ø 6 mm x 39 m
  • Quadruple clipped, option: single or double
Running gear system
  • Hydro-static, continuous speed forwards and backwards
  • Speed: 0 - 2 km/h
  • Chain width: 180 mm, bearing load: 0.29 kgf/cm²
  • With white rubber tracks, alternatively: black rubber tracks

Maeda MC 104

Examples based on our practical experience

  • schneider_fuhrpark-elektro-miniraupenkran_01.jpg
  • schneider_fuhrpark-elektro-miniraupenkran_02.jpg
  • schneider_fuhrpark-elektro-miniraupenkran_03.jpg
  • schneider_fuhrpark-elektro-miniraupenkran_04.jpg
  • schneider_fuhrpark-elektro-miniraupenkran_05.jpg
  • schneider_fuhrpark-elektro-miniraupenkran_06.jpg
Extended data sheet

Close

 



More than 20 years' experience in the sector and plenty of special equipment make us qualified for your challenge.

We'll move mountains for you, regardless of where. It does not matter whether the packaged goods are particularly large, particularly heavy or particularly bulky. Special tasks require special equipment and we have plenty to offer you and will always use it according to requirements and economically.

Our company-owned equipment has increased to become a high-performance fleet of vehicles and machinery over the years. We are continually and purposefully expanding our range by investment and our own developments here at Schneider Montage GmbH.