• Fleet of vehicles
  •  
  • Special equipment

MAN 26.430 HGV

 

MAN 26.430 HGV

Close

 

MAN 26.430 HGV

MAN 26.430 HGV

SPECIFICATIONS

  • Curtain side HGV mainly used to transport devices and equipment
  • To drive on to it using a forklift, electric cranes, etc., the rear end is sloped and two moveable ramps are installed securely

TECHNICAL DATA

Type MAN 26.430
Length 9,700 mm
Width 2,550 mm
Height 4,000 mm
Construction
  • Usable dimensions 6,900 mm x 2,400 mm x 2,850 mm
  • Comprises rear shutter, side slider and Edscha
  • chassis behind the rear axle, sloped to 1,750 x 180 mm
Ramps
  • Two ramps, each L 2,950 mm x W 950 mm, moveable
  • Elector-hydraulic drive
Gross weight 25,700 kg
Empty weight 10,950 kg
Payload 14,750 kg
Combination variants
  • Operation with Kotschenreuther trailer
  • Transport can be carried out with a total train weight of up to 40 t
  • Loading weight differences that go beyond this must be approved

MAN 26.430 HGV

Examples based on our practical experience

  • schneider_fuhrpark_lkw_1.jpg
  • schneider_fuhrpark_lkw_2.jpg
  • schneider_fuhrpark_lkw_3.jpg
  • schneider_fuhrpark_lkw_4.jpg
  • schneider_fuhrpark_lkw_5.jpg
  • schneider_fuhrpark_lkw_6.jpg
  • schneider_fuhrpark_lkw_7.jpg
  • schneider_fuhrpark_lkw_8.jpg
  • schneider_fuhrpark_lkw_9.jpg
  • schneider_fuhrpark_lkw_10.jpg
  • schneider_fuhrpark_lkw_11.jpg
Extended data sheet

Close

 
3-axle trailer

 

3-axle trailer

Close

 

3-axle trailer

3-axle trailer

SPECIFICATIONS

  • Curtain side trailer mainly used to transport devices and equipment
  • To transport forklifts, electric cranes, etc., a one-piece lattice ramp is affixed
  • The MAN 26.430 is used as the tractive unit

TECHNICAL DATA

Type APS 324 Kotschenreuther
Length 9,080 – 9,680 mm
Width 2,550 mm
Height 4,000 mm
Loading height 907 mm
Axle load 3 x 10,000 kg
Empty weight 9,850 kg
Technical gross weight 30,000 kg möglich
Construction
  • Usable dimensions 7,350 mm x 2,450 mm x 3,100 mm
  • 2 x side sliders, Edscha and structure widening
Ramp
  • One-piece lattice ramp, L 5,900 mm x W 2,450 mm
  • Driven electro-hydraulically
Remark Can be used without additional approval up to 40,000 kg total tractive weight

3-axle trailer

Examples based on our practical experience

  • schneider_fuhrpark_anhaenger_1.jpg
  • schneider_fuhrpark_anhaenger_2.jpg
  • schneider_fuhrpark_anhaenger_3.jpg
  • schneider_fuhrpark_anhaenger_4.jpg
  • schneider_fuhrpark_anhaenger_5.jpg
  • schneider_fuhrpark_anhaenger_6.jpg
  • schneider_fuhrpark_anhaenger_7.jpg
Extended data sheet

Close

 
Mobile workshop

 

Mobile workshop

Close

 

Mobile workshop

Mobile workshop

SPECIFICATIONS

  • 7.5 t box body HGV mainly used to transport devices and equipment
  • In particular, it is used to carry out assembly tasks when relocating machines, when carrying out heavy and special assembly, industrial assembly, etc.

TECHNICAL DATA

Type MAN 8.250
Length 7,140 mm
Width 2,550 mm
Height 3,180 mm
Construction
  • Usable dimensions 4,000 mm x 2,200 mm x 1,980 mm
  • Insulated box body with additional heating
  • Bott equipment system
  • 16 A electrical connection with 16 A and 220 V sub-distribution
Hydraulic platform Bär, one-piece, L 1,600 mm x W 2,250 mm
Payload 1,290 kg

Mobile workshop

Examples based on our practical experience

  • schneider_fuhrpark_werkstattwagen_1.jpg
  • schneider_fuhrpark_werkstattwagen_2.jpg
  • schneider_fuhrpark_werkstattwagen_3.jpg
  • schneider_fuhrpark_werkstattwagen_4.jpg
  • schneider_fuhrpark_werkstattwagen_5.jpg
  • schneider_fuhrpark_werkstattwagen_6.jpg
  • schneider_fuhrpark_werkstattwagen_7.jpg
Extended data sheet

Close

 
9 t Hyster forklift

 

9 t Hyster forklift

Close

 

9 t Hyster forklift

9 t Hyster forklift

SPECIFICATIONS

  • Front tower forklift designed particularly for use when assembling
  • With open cab (only driver protection roof) for better view and acoustics
  • Fork adjusting device including fork carriage that can be replaced with a hydraulically-adjustable crane boom using quick-change system
  • Carrying out assembly with insertion swivel hook and fork extension

TECHNICAL DATA

Type Hyster H 9.00 FT6G
Length without forks 3,944 mm
Width 2,030 mm
Height 2,702 mm
Drive Liquefied petroleum gas with double cylinder holder
Tower Triplex with complete free lift
Fork length 2,400 mm
Free lift 1,565 mm
Lift height 4,615 mm
Basic load bearing capacity 9,000 kg at 600 mm L/C
Empty weight 13,180 kg (with fork adjusting device)
Attachments  
SHB crane boom
  • P5-KRAT, 12.0 t
  • 1,300 - 2,200 mm boom (with 2 hooks)
  • Boom can be adjusted hydraulically
  • Crane hook with swivel can be rotated while loaded
  • Empty weight: 703 kg (without transport rack)
  • Bearing load: 9,000 kg at 600 mm L/C
  • Bearing load: 9,000 kg at 1,200 mm L/C
  • Bearing load: 9,000 kg at 2,200 mm L/C
  • Empty weight: 1,500 kg
  • The crane boom is secured in a rack for transport purposes
  • The transport rack is also used for a fast and safe changeover on the forklift, as well as to store gas bottles, sling gear, equipment, etc.
Fork adjusting device
  • FEM 4A (width: 2,030 mm)
  • Fork adjusting device with P1-ZVSV 10.0 side shift valve
  • Hydraulic continuous fork adjustment
  • The side shift is 400 mm when the forks are in the middle position and decreases towards zero as you move left and right to the end positions

9 t Hyster forklift

Examples based on our practical experience

  • schneider_fuhrpark_gabelstapler_9t_1.jpg
  • schneider_fuhrpark_gabelstapler_9t_2.jpg
  • schneider_fuhrpark_gabelstapler_9t_3.jpg
  • schneider_fuhrpark_gabelstapler_9t_4.jpg
  • schneider_fuhrpark_gabelstapler_9t_5.jpg
  • schneider_fuhrpark_gabelstapler_9t_6.jpg
  • schneider_fuhrpark_gabelstapler_9t_7.jpg
  • schneider_fuhrpark_gabelstapler_9t_8.jpg
Extended data sheet

Close

 
5.5 t Hyster forklift

 

5.5 t Hyster forklift

Close

 

5.5 t Hyster forklift

5.5 t Hyster forklift

SPECIFICATIONS

  • Front tower forklift designed particularly for use when assembling
  • With open cab (only with driver protection roof) for better view and acoustics
  • Carrying out assembly with interchangeable forks and extensions, as well as various sizes of swivel hooks

TECHNICAL DATA

Type Hyster H 5,5 FT
Length 4,540 mm with 1,200 mm forks
Width 1,219 mm
Height 2,515 mm
Drive Liquefied petroleum gas with double cylinder holder
Tower Triplex with complete free lift
Free lift 1,530 mm
Lift height 5,000 mm
Basic load bearing capacity 5,500 kg at 600 mm L/C
Forks 1,200 mm oder 2,400 mm
Empty weight 7,529 kg
Attachment  
Stabau crane boom
  • 1,300 - 2,200 mm boom (with 2 hooks)
  • Bearing load: 5,500 kg at 600 mm L/C
  • Bearing load: 3,000 kg at 1,200 mm L/C
  • Bearing load: 1,650 kg at 2,200 mm L/C
  • Empty weight: 348 kg (without transport rack)
  • The crane boom is secured in a rack for transport purposes
  • The transport rack is also used for a fast and safe changeover on the forklift, as well as to store forks sized up to 1,200 mm, gas bottles, sling gear, equipment, etc.

5.5 t Hyster forklift

Examples based on our practical experience

  • schneider_fuhrpark_gabelstapler_5,5t_1.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_2.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_3.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_4.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_5.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_6.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_7.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_8.jpg
  • schneider_fuhrpark_gabelstapler_5,5t_9.jpg
Extended data sheet

Close

 
2.5 t Hyster forklift

 

2.5 t Hyster forklift

Close

 

2.5 t Hyster forklift

2.5 t Hyster forklift

SPECIFICATIONS

  • Front tower forklift designed particularly for use when assembling
  • With open cab (only with driver protection roof) for better view and acoustics
  • interchangeable forks and extensions, as well as swivel hooks

TECHNICAL DATA

Type Hyster H 2,5 FT
Length 2,400 mm without forks
Width 1,200 mm
Height 2,580 mm
Drive Liquefied petroleum gas
Tower Triplex with complete free lift
Free lift 2,150 mm
Lift height 6,000 mm
Basic load bearing capacity 2,500 kg at 600 mm L/C
Forks L 1,200 mm x W 100 mm x H 40mm
Empty weight 4,230 kg

Hyster H 2.5 FT

Examples based on our practical experience

  • schneider_fuhrpark_gabelstapler_2,5t_1.jpg
  • schneider_fuhrpark_gabelstapler_2,5t_2.jpg
  • schneider_fuhrpark_gabelstapler_2,5t_3.jpg
Extended data sheet

Close

 
Valla V-Kart 90 E electric indoor crane

 

Valla V-Kart 90 E electric indoor crane

Close

 

Valla V-Kart 90 E electric indoor crane

Valla V-Kart 90 E electric indoor crane

SPECIFICATIONS

  • Use in industrial plants on smooth, solid ground
  • Not authorised for use on public roads; transported to usage location using a suitable HGV
  • Mainly used to lift, transport and position loads; can move freely without support
  • Particularly suitable for machine transport, operational relocations, industrial assembly or can also be used for machine construction

TECHNICAL DATA

Type Valla V-Kart 90 E
Length 3,435 mm
Width 1,735 mm
Height 2,290 mm
Drive
  • Electric with 14 KW - 48 volt reversible DC motor
  • Maximum speed 10 km / h
Battery 725 Ah – 48 volt
Steering Fully hydraulic with 2 x 70 ° steering angle
Tower
  • Comprising 4 tower elements that can be adjusted hydraulically
  • Maximum angle of the tower when fully raised: 51 °
  • Distance from hook to ground in horizontal position: 1.6 m
Maximum lift height 7,500 mm with 2,500 mm boom with 2,800 kg load
Maximum range 5,300 mm at 1,500 mm hook height with 1,900 kg residual load
Basic load bearing capacity 9,000 kg
Empty weight 9,200 kg
Attachments  
Adjustable point
  • Boom extension
  • Boom point can be adjusted mechanically by 500 mm
  • Angle can be continuously moved hydraulically
  • Maximum lift height: 9,000 mm
  • Maximum range: 6,910 mm

Valla V-Kart 90 E

Examples based on our practical experience

  • schneider_fuhrpark_vkart_1.jpg
  • schneider_fuhrpark_vkart_2.jpg
  • schneider_fuhrpark_vkart_3.jpg
  • schneider_fuhrpark_vkart_4.jpg
  • schneider_fuhrpark_vkart_5.jpg
  • schneider_fuhrpark_vkart_6.jpg
  • schneider_fuhrpark_vkart_7.jpg
Extended data sheet

Close

 
MC 104 electric mini caterpillar crane

 

MC 104 electric mini caterpillar crane

Close

 

MC 104 electric mini caterpillar crane

MC 104 electric mini caterpillar crane

SPECIFICATIONS

  • The mini caterpillar crane is designed for use indoors, in spaces that are difficult to access
  • Thanks to its rubber tracks and leg supports, it has a low bearing load and is particularly kind on laminated floors or natural stone floors
  • It is predominantly used if space is limited or to moved through narrow room doors
  • Its compact construction enables steel girders, machine parts or particularly bulky parts to be assembled in the building

TECHNICAL DATA

Type Maeda MC 104
Load 995 kg with 1.1 m boom
Length 2,160 mm, of which running gear: 1,044 mm
Width 600 mm
Height 1,305 mm
Empty weight 1,050 kg
Drive Electric motor, 16 A, 400 V, power: 5,5 KW
Maximum hook height 5.5 m
Maximum range 5.1 m
Rotor
  • Operational range: 360 ° continuous
  • Hydraulic support
  • Use with remote control
Winch system
  • Cable speed: 3.2 m/min
  • Cable type: IWRC 6 x Fl (29) Ø 6 mm x 39 m
  • Quadruple clipped, option: single or double
Running gear system
  • Hydro-static, continuous speed forwards and backwards
  • Speed: 0 - 2 km/h
  • Chain width: 180 mm, bearing load: 0.29 kgf/cm²
  • With white rubber tracks, alternatively: black rubber tracks

Maeda MC 104

Examples based on our practical experience

  • schneider_fuhrpark_miniraupenkran_1.jpg
  • schneider_fuhrpark_miniraupenkran_2.jpg
  • schneider_fuhrpark_miniraupenkran_3.jpg
  • schneider_fuhrpark_miniraupenkran_4.jpg
  • schneider_fuhrpark_miniraupenkran_5.jpg
  • schneider_fuhrpark_miniraupenkran_6.jpg
  • schneider_fuhrpark_miniraupenkran_7.jpg
  • schneider_fuhrpark_miniraupenkran_8.jpg
  • schneider_fuhrpark_miniraupenkran_9.jpg
  • schneider_fuhrpark_miniraupenkran_10.jpg
Extended data sheet

Close

 



More than 20 years' experience in the sector and plenty of special equipment make us qualified for your challenge.

We'll move mountains for you, regardless of where. It does not matter whether the packaged goods are particularly large, particularly heavy or particularly bulky. Special tasks require special equipment and we have plenty to offer you and will always use it according to requirements and economically.

Our company-owned equipment has increased to become a high-performance fleet of vehicles and machinery over the years. We are continually and purposefully expanding our range by investment and our own developments here at Schneider Montage GmbH.

Storage building

 

Storage building

Close

 

Storage building

Storage building

SPECIFICATIONS

  • The storage building is used to store devices, equipment and auxiliary material
  • The job is prepared and the transport vehicle loaded here
  • The equipment is unloaded after the job has been completed
  • The equipment is overhauled, cleaned and repaired

TECHNICAL DATA

Type Cold hall
Dimensions L 40,000 x W 20,000 x H 7,000 mm
Construction
  • Steel hall with profiled sheeting cover
  • Slat roller gate, 4,000 x 5,000 mm
  • Concrete floor with Ashford Formula silicate finishing system
  • Dome lights with vent flaps throughout
  • LED lighting
  • Connection for charging station for electrical devices
Fittings
  • 2 rows of pallet racks, 1 x 40 m and 1 x 15 m with 3 shelves
  • 2 rows of cantilever racking, L = 15 m, variable
  • Racking systems can be driven to using four-way forklifts
Usage
  • Parking location for forklifts and electric cranes
  • Store for equipment and auxiliary material
  • Loading and unloading the vehicles
Extension 12 x 12 x 3 m platform to store small materials

Storage building

Examples based on our practical experience

  • schneider_sonderausruestung_halle_1.jpg
  • schneider_sonderausruestung_halle_2.jpg
  • schneider_sonderausruestung_halle_3.jpg
  • schneider_sonderausruestung_halle_4.jpg
  • schneider_sonderausruestung_halle_5.jpg
  • schneider_sonderausruestung_halle_6.jpg
  • schneider_sonderausruestung_halle_7.jpg
  • schneider_sonderausruestung_halle_8.jpg
  • schneider_sonderausruestung_halle_9.jpg
  • schneider_sonderausruestung_halle_10.jpg
  • schneider_sonderausruestung_halle_11.jpg
  • schneider_sonderausruestung_halle_12.jpg
Extended data sheet

Close

 
Container system

 

Container system

Close

 

Container system

Container system

SPECIFICATIONS

  • Containers are used to carry out industrial assemblies that take a long time
  • The containers have standard, basic equipment and guarantee that the auxiliary material and auxiliary devices are stored safely with a clear layout
  • Various container sizes are available
  • Contents and dimensions are adjusted or extended according to the job
  • Suitable HGVs are normally used to transport containers to and from the site

TECHNICAL DATA

Type 1 Aluminium container
Length 2,650 mm
Width 2,100 mm
Height 2,400 mm
Weight Approx. 2,500 kg
Usage Workshop container
Type 2 Aluminium container
Length 2,650 mm
Width 2,100 mm
Height 2,400 mm
Weight Approx. 2,500 kg
Usage Devices and equipment with basic equipment
Type 3 Steel container
Length 2,450 mm
Width 2,200 mm
Height 2,250 mm
Weight Approx. 2,500 kg
Usage Devices and equipment without basic equipment
Type 4 20" steel container
Length 6,080 mm
Width 2,440 mm
Height 2,590 mm
Weight Approx. 3,000 kg
Usage Workshop container

Container system

Examples based on our practical experience

  • schneider_sonderausruestung_container_1.jpg
  • schneider_sonderausruestung_container_2.jpg
  • schneider_sonderausruestung_container_3.jpg
Extended data sheet

Close

 
Welding devices and equipment

 

Welding devices and equipment

Close

 

Welding devices and equipment

Welding devices and equipment

SPECIFICATIONS

  • WIG, MIG, MAG welding procedures used
  • The following materials are welded: structural steels up to S 355, authentic chrome-nickel steels and aluminium alloys (predominantly self-hardening alloys)
  • Welding carried out on pipes and sheet metal

TECHNICAL DATA

Commercial welding machines (Merkle, Lorch, etc.) are used according to customer or local trading structure requirements

Welding devices and equipment

Examples based on our practical experience

  • schneider_sonderausruestung_schweisen_1.jpg
  • schneider_sonderausruestung_schweisen_2.jpg
  • schneider_sonderausruestung_schweisen_3.jpg
  • schneider_sonderausruestung_schweisen_4.jpg
  • schneider_sonderausruestung_schweisen_5.jpg
  • schneider_sonderausruestung_schweisen_6.jpg
  • schneider_sonderausruestung_schweisen_7.jpg
Extended data sheet

Close

 
Lifting systems and transport rollers

 

Lifting systems and transport rollers

Close

 

Lifting systems and transport rollers

Lifting systems and transport rollers

SPECIFICATIONS

  • Used to lift and move heavy and bulky loads
  • Various lifting systems and technologies are used based on the local usage conditions
  • The lifting equipment can be operated either using a hand pump or using a power unit
  • Different types of transport rollers are used to move on stable floors

TECHNICAL DATA

Type 1 Hydraulic systems
  • Commercial devices such as Europress, HTS, etc. are used.
  • Lifting equipment with 10 - 35 t lifting force is used
  • Control units with 4 and 6-fold distribution
Type 2 Air systems
  • 20 and 40 t lifting cushions are used
  • Control units with 2-fold distribution
Type 3 Transport rollers
  • Transport carriages from FL6 (up to 12 t load) to FL 60 (up to 120 t load) in stock
  • Each carriage can be provided with two fixed or one steered axis

Lifting systems and transport rollers

Examples based on our practical experience

  • schneider_sonderausruestung_hebesysteme_1.jpg
  • schneider_sonderausruestung_hebesysteme_2.jpg
  • schneider_sonderausruestung_hebesysteme_3.jpg
  • schneider_sonderausruestung_hebesysteme_4.jpg
  • schneider_sonderausruestung_hebesysteme_5.jpg
  • schneider_sonderausruestung_hebesysteme_6.jpg
  • schneider_sonderausruestung_hebesysteme_7.jpg
  • schneider_sonderausruestung_hebesysteme_8.jpg
  • schneider_sonderausruestung_hebesysteme_9.jpg
Extended data sheet

Close

 
A-cradle system

 

A-cradle system

Close

 

A-cradle system

A-cradle system

SPECIFICATIONS

  • Used to bear the load in locations that are difficult to access such as assembling escalators in department stores, assembling systems in the drinks industry, etc.
  • Set up to construct systems depending on the load type or the conditions on-site
  • Steel and aluminium design

TECHNICAL DATA

Type Schneider Montage GmbH system construction
Length
  • Box beam, one-piece, in various lengths
  • IP-E beam, one-piece and multi-piece in various lengths
Width Dependent on the height of the leg support
Height Designed with leg supports of variable height
Load Dependent on the system selected

A-cradle system

Examples based on our practical experience

  • schneider_sonderausruestung_a_bocksysteme_1.jpg
  • schneider_sonderausruestung_a_bocksysteme_2.jpg
  • schneider_sonderausruestung_a_bocksysteme_3.jpg
  • schneider_sonderausruestung_a_bocksysteme_4.jpg
  • schneider_sonderausruestung_a_bocksysteme_5.jpg
  • schneider_sonderausruestung_a_bocksysteme_6.jpg
  • schneider_sonderausruestung_a_bocksysteme_7.jpg
Extended data sheet

Close

 
Heavy-duty supports in system construction

 

Heavy-duty supports in system construction

Close

 

Heavy-duty supports in system construction

Heavy-duty supports in system construction

SPECIFICATIONS

  • Used to bear the load in locations that are difficult to access, e.g. carrying out assembly in industrial plants or to construct platforms and pedestals for transporting loads
  • Set up to construct systems depending on the load type or the conditions at the usage location

TECHNICAL DATA

Type Schneider Montage GmbH system construction
Length 500 mm
Width 500 mm
Height 500 / 750 / 1,000 / 1,500 / 2,000 mm
Load According to calculation for each job
Design Steel and aluminium
Special design With adjusting screw from 500 to 700 mm

Heavy-duty supports in system construction

Examples based on our practical experience

  • schneider_sonderausruestung_schwerlaststuetzen_1.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_2.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_3.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_4.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_5.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_6.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_7.jpg
Extended data sheet

Close

 
Beams and spreaders

 

Beams and spreaders

Close

 

Beams and spreaders

Beams and spreaders

SPECIFICATIONS

  • Used to lift loads safely
  • Lifting, turning and transporting long, heavy or special loads without oscillation
  • It is important to ensure that the weight is distributed evenly when handling different load shapes
  • Mainly used with designs for crane or forklift operation

TECHNICAL DATA

Type
  • Adjustable spreaders from 5 to 10 t
  • Beams from 5 to 10 t
  • Adjustable frame spreaders
  • Adjustable frame beams

Beams and spreaders

Examples based on our practical experience

  • schneider_sonderausruestung_traversen_1.jpg
  • schneider_sonderausruestung_traversen_2.jpg
  • schneider_sonderausruestung_traversen_3.jpg
Extended data sheet

Close

 



More than 20 years' experience in the sector and plenty of special equipment make us qualified for your challenge.

We'll move mountains for you, regardless of where. It does not matter whether the packaged goods are particularly large, particularly heavy or particularly bulky. Special tasks require special equipment and we have plenty to offer you and will always use it according to requirements and economically.

Our company-owned equipment has increased to become a high-performance fleet of vehicles and machinery over the years. We are continually and purposefully expanding our range by investment and our own developments here at Schneider Montage GmbH.