• Special equipment

Storage building

 

Storage building

Close

 

Storage building

Storage building

SPECIFICATIONS

  • The storage building is used to store devices, equipment and auxiliary material
  • The job is prepared and the transport vehicle loaded here
  • The equipment is unloaded after the job has been completed
  • The equipment is overhauled, cleaned and repaired

TECHNICAL DATA

Type Cold hall
Dimensions L 40,000 x W 20,000 x H 7,000 mm
Construction
  • Steel hall with profiled sheeting cover
  • Slat roller gate, 4,000 x 5,000 mm
  • Concrete floor with Ashford Formula silicate finishing system
  • Dome lights with vent flaps throughout
  • LED lighting
  • Connection for charging station for electrical devices
Fittings
  • 2 rows of pallet racks, 1 x 40 m and 1 x 15 m with 3 shelves
  • 2 rows of cantilever racking, L = 15 m, variable
  • Racking systems can be driven to using four-way forklifts
Usage
  • Parking location for forklifts and electric cranes
  • Store for equipment and auxiliary material
  • Loading and unloading the vehicles
Extension 12 x 12 x 3 m platform to store small materials

Storage building

Examples based on our practical experience

  • schneider_sonderausruestung_halle_1.jpg
  • schneider_sonderausruestung_halle_2.jpg
  • schneider_sonderausruestung_halle_3.jpg
  • schneider_sonderausruestung_halle_4.jpg
  • schneider_sonderausruestung_halle_5.jpg
  • schneider_sonderausruestung_halle_6.jpg
  • schneider_sonderausruestung_halle_7.jpg
  • schneider_sonderausruestung_halle_8.jpg
  • schneider_sonderausruestung_halle_9.jpg
  • schneider_sonderausruestung_halle_10.jpg
  • schneider_sonderausruestung_halle_11.jpg
  • schneider_sonderausruestung_halle_12.jpg
Extended data sheet

Close

 
Container system

 

Container system

Close

 

Container system

Container system

SPECIFICATIONS

  • Containers are used to carry out industrial assemblies that take a long time
  • The containers have standard, basic equipment and guarantee that the auxiliary material and auxiliary devices are stored safely with a clear layout
  • Various container sizes are available
  • Contents and dimensions are adjusted or extended according to the job
  • Suitable HGVs are normally used to transport containers to and from the site

TECHNICAL DATA

Type 1 Aluminium container
Length 2,650 mm
Width 2,100 mm
Height 2,400 mm
Weight Approx. 2,500 kg
Usage Workshop container
Type 2 Aluminium container
Length 2,650 mm
Width 2,100 mm
Height 2,400 mm
Weight Approx. 2,500 kg
Usage Devices and equipment with basic equipment
Type 3 Steel container
Length 2,450 mm
Width 2,200 mm
Height 2,250 mm
Weight Approx. 2,500 kg
Usage Devices and equipment without basic equipment
Type 4 20" steel container
Length 6,080 mm
Width 2,440 mm
Height 2,590 mm
Weight Approx. 3,000 kg
Usage Workshop container

Container system

Examples based on our practical experience

  • schneider_sonderausruestung_container_1.jpg
  • schneider_sonderausruestung_container_2.jpg
  • schneider_sonderausruestung_container_3.jpg
Extended data sheet

Close

 
Welding devices and equipment

 

Welding devices and equipment

Close

 

Welding devices and equipment

Welding devices and equipment

SPECIFICATIONS

  • WIG, MIG, MAG welding procedures used
  • The following materials are welded: structural steels up to S 355, authentic chrome-nickel steels and aluminium alloys (predominantly self-hardening alloys)
  • Welding carried out on pipes and sheet metal

TECHNICAL DATA

Commercial welding machines (Merkle, Lorch, etc.) are used according to customer or local trading structure requirements

Welding devices and equipment

Examples based on our practical experience

  • schneider_sonderausruestung_schweisen_1.jpg
  • schneider_sonderausruestung_schweisen_2.jpg
  • schneider_sonderausruestung_schweisen_3.jpg
  • schneider_sonderausruestung_schweisen_4.jpg
  • schneider_sonderausruestung_schweisen_5.jpg
  • schneider_sonderausruestung_schweisen_6.jpg
  • schneider_sonderausruestung_schweisen_7.jpg
Extended data sheet

Close

 
Lifting systems and transport rollers

 

Lifting systems and transport rollers

Close

 

Lifting systems and transport rollers

Lifting systems and transport rollers

SPECIFICATIONS

  • Used to lift and move heavy and bulky loads
  • Various lifting systems and technologies are used based on the local usage conditions
  • The lifting equipment can be operated either using a hand pump or using a power unit
  • Different types of transport rollers are used to move on stable floors

TECHNICAL DATA

Type 1 Hydraulic systems
  • Commercial devices such as Europress, HTS, etc. are used.
  • Lifting equipment with 10 - 35 t lifting force is used
  • Control units with 4 and 6-fold distribution
Type 2 Air systems
  • 20 and 40 t lifting cushions are used
  • Control units with 2-fold distribution
Type 3 Transport rollers
  • Transport carriages from FL6 (up to 12 t load) to FL 60 (up to 120 t load) in stock
  • Each carriage can be provided with two fixed or one steered axis

Lifting systems and transport rollers

Examples based on our practical experience

  • schneider_sonderausruestung_hebesysteme_1.jpg
  • schneider_sonderausruestung_hebesysteme_2.jpg
  • schneider_sonderausruestung_hebesysteme_3.jpg
  • schneider_sonderausruestung_hebesysteme_4.jpg
  • schneider_sonderausruestung_hebesysteme_5.jpg
  • schneider_sonderausruestung_hebesysteme_6.jpg
  • schneider_sonderausruestung_hebesysteme_7.jpg
  • schneider_sonderausruestung_hebesysteme_8.jpg
  • schneider_sonderausruestung_hebesysteme_9.jpg
Extended data sheet

Close

 
A-cradle system

 

A-cradle system

Close

 

A-cradle system

A-cradle system

SPECIFICATIONS

  • Used to bear the load in locations that are difficult to access such as assembling escalators in department stores, assembling systems in the drinks industry, etc.
  • Set up to construct systems depending on the load type or the conditions on-site
  • Steel and aluminium design

TECHNICAL DATA

Type Schneider Montage GmbH system construction
Length
  • Box beam, one-piece, in various lengths
  • IP-E beam, one-piece and multi-piece in various lengths
Width Dependent on the height of the leg support
Height Designed with leg supports of variable height
Load Dependent on the system selected

A-cradle system

Examples based on our practical experience

  • schneider_sonderausruestung_a_bocksysteme_1.jpg
  • schneider_sonderausruestung_a_bocksysteme_2.jpg
  • schneider_sonderausruestung_a_bocksysteme_3.jpg
  • schneider_sonderausruestung_a_bocksysteme_4.jpg
  • schneider_sonderausruestung_a_bocksysteme_5.jpg
  • schneider_sonderausruestung_a_bocksysteme_6.jpg
  • schneider_sonderausruestung_a_bocksysteme_7.jpg
Extended data sheet

Close

 
Heavy-duty supports in system construction

 

Heavy-duty supports in system construction

Close

 

Heavy-duty supports in system construction

Heavy-duty supports in system construction

SPECIFICATIONS

  • Used to bear the load in locations that are difficult to access, e.g. carrying out assembly in industrial plants or to construct platforms and pedestals for transporting loads
  • Set up to construct systems depending on the load type or the conditions at the usage location

TECHNICAL DATA

Type Schneider Montage GmbH system construction
Length 500 mm
Width 500 mm
Height 500 / 750 / 1,000 / 1,500 / 2,000 mm
Load According to calculation for each job
Design Steel and aluminium
Special design With adjusting screw from 500 to 700 mm

Heavy-duty supports in system construction

Examples based on our practical experience

  • schneider_sonderausruestung_schwerlaststuetzen_1.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_2.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_3.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_4.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_5.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_6.jpg
  • schneider_sonderausruestung_schwerlaststuetzen_7.jpg
Extended data sheet

Close

 
Beams and spreaders

 

Beams and spreaders

Close

 

Beams and spreaders

Beams and spreaders

SPECIFICATIONS

  • Used to lift loads safely
  • Lifting, turning and transporting long, heavy or special loads without oscillation
  • It is important to ensure that the weight is distributed evenly when handling different load shapes
  • Mainly used with designs for crane or forklift operation

TECHNICAL DATA

Type
  • Adjustable spreaders from 5 to 10 t
  • Beams from 5 to 10 t
  • Adjustable frame spreaders
  • Adjustable frame beams

Beams and spreaders

Examples based on our practical experience

  • schneider_sonderausruestung_traversen_1.jpg
  • schneider_sonderausruestung_traversen_2.jpg
  • schneider_sonderausruestung_traversen_3.jpg
Extended data sheet

Close

 



More than 20 years' experience in the sector and plenty of special equipment make us qualified for your challenge.

We'll move mountains for you, regardless of where. It does not matter whether the packaged goods are particularly large, particularly heavy or particularly bulky. Special tasks require special equipment and we have plenty to offer you and will always use it according to requirements and economically.

Our company-owned equipment has increased to become a high-performance fleet of vehicles and machinery over the years. We are continually and purposefully expanding our range by investment and our own developments here at Schneider Montage GmbH.